How to use the facial steamer?
Step 1* Add water
Add water into the base, Do not fill water more than 50ml
Step 2* Install steamer The steam mask aligns with the bottom card slot, rotates clockwise and secures
Step 3* Power on& Steam Face Turning on the steamer, you can see the blue light is shining and produce steamer within 40s
You can choose 1 or 2 switch as needs, When use a nasal mask, the mask can be placed in the middle to adjust the steam direction When the steam evaporated completely or finished, turn off the switch and unplug Relax for 8 minutes during hydration, then clean your face with COLD water
Attention Please:
1. When the steamer starts to release steam, some hot water droplets may be splashed, which is normal
2. Please keep at least 20CM between face and nozzle edge. the steam should be directed at the top of the chin. Ensure the steam covers entire face
3. When water insufficient, the steam will change or stop to spray steam. Please turn off and add water after cooling for 10 minutes
4. Special Note: If the steamer shut down automatically as water used out, Please wait 2 minutes and then add water to star
Reviews
There are no reviews yet.